Compared with other categories, copper doors in addition to resplendent, calm atmosphere, there is a feature that is favorable feng shui. Because the copper door is a symbol of honor and auspicious, ancient times, only the emperor will be the door to use the door, and now with the continuous improvement of people's living standards, villa Tongmen also flew into the homes of ordinary people. In the feng shui school villa Tongmen noble and elegant, a symbol of good luck. Like the family of faithful "patron saint".

 

    1. Actual measurement of the width and height of the door. To the upper, middle and lower three measurements are consistent, if not consistent to the narrowest prevail, but the error shall not exceed 20 mm.

    2. For errors of more than 20mm to correct the wall hole, correction can be used to amend the cement mortar or lime.

    3. The thickness of the wall of the wall should also measure the amount of the middle, the next three to see the thickness of the wall is the same, but also depends on the wall and the top of the wall above the wall thickness is the same, not the same to take them Maximum, but the error shall not exceed 5 mm.

    4. If the wall thickness of the error of more than 5 mm, you need to be amended.

    5. If the wall for the T-wall, you need to use the blockboard to do the width of 50-60mm fake wall placed door line. The thickness is the same as the wall thickness of the wall.

    6. The thickness of the door wall minimum of not less than 80 mm. Low and 80mm size of the door frame strength is not great, the support of the door is not enough strength. If less than 80mm need to thicken the thickness of the wall to 80mm or more.

    7. When the door above the prominent beam, the top door can not be installed. Also need to use the blockboard to do 50-60mm high false wall, the length of the width of the same door, the depth and the same thickness of the hole.

    8. The door has a step. There is a step side of the face line to add a step height, the specific size according to the height of the steps to set.

    9. bathroom and kitchen door wall thickness of the wall should pay special attention to the thickness of the wall wall. General single-sided tile thickened 25 mm, both sides of the brick thickened 50 mm, the specific situation by the designer and the customer and the decoration company signed three confirmed. The final size should include the thickness of the wall. It is best to measure after the wall is affixed.

    10. Note the opening direction of the door, the opening direction is defined as: from the front of the door, the left hand left in the left, the handle in the right for the right to open.

    11. Dumb, window cover measurement is basically the same as the hole measurement, but the size of the actual measurement results recorded, without deduction.

    Dumb mouth: refers to the door is not installed or other things shield the wall openings, such as the living room and balcony, bedroom and balcony between the openings.

Window cover: refers to the window frame and the door frame along the side of the wooden sets (or other materials), pressure on the wall a few centimeters.

    Do the brand, copper doors as a category of high-end products, rich style, matching the lock with the match, not in the ordinary, a lot of copper doors will choose a brand strength of the lock factory. According to statistics, China's future demand for high-end locks will be more than 10 billion US dollars. Therefore, the lock enterprises should be hard training internal strength, and constantly develop high-tech, high value-added new products, in improving the quality of products on the basis of increasing brand training efforts. It can be said that the importance of brand strength, should become the consensus of many lock enterprises.

    Take the artistic, personalized route. At present, the copper door is not just a security door, it is a work of art. Therefore, the lock enterprises must be in the design of the lock under the foot homework, increase the intensity of development, cultivate a personalized, artistic products, product differentiation, to attract copper door manufacturers eye.